CBRDY - SF-780NTI BLACK TONER

  • MSDS: CBRDY
  • Manufacturer: SHARP ELECTRONICS CORP
  • Product Name: SF-780NTI BLACK TONER
  • National Stock Number: 6850-01-413-9512
Product Identification

Product ID:SF-780NTI BLACK TONER
MSDS Date:03/15/1993
FSC:6850
NIIN:01-413-9512
MSDS Number: CBRDY

Responsible Party
SHARP ELECTRONICS CORP
22-22 NAGAIKE-CHO, ABENO-KU
OSAKA, JAPAN

Emergency Phone: 800-255-3924

Info Phone: 201-529-8200

Cage: 18520

Contractor
SHARP ELECTRONICS CORP.
MAHWAH, NJ 07430-2135 US

Telephone: 201-529-9223

Cage: 18520

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <6%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


ACRYLIC ACID BUTYL ESTER POLYMER WITH STYRENE

CAS: 25767-47-9

Fraction By Weight: >92%

OSHA PEL N/K ISHED

ACGIH TLV: N/K


ORGANIC AMMONIUM SALT

CAS: 102564-46-6

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MINIMUM IRRITATION TO
RESPIRATORY TRACT MAY OCCUR AS WITH EXPOSURE TO ANY NON-TOXIC DUST.
CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD . INHAL:REMOVE TO FRESH AIR IF EFFECTS OCCUR,
CONSULT LOCAL MEDICAL PERSONNEL. EYES:IN CASE OF CONTACT, IMMEDIAT
ELY FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES.

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL, FOAM OR WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS MATERIAL WILL BURN IN THE CASE OF FIRE.
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSUAL FIRE OR
EXPLOSION HAZARDS.

Accidental Release

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS FOR
SAFETY REASONS.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:INHALATION SHOULD BE AVOIDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:1.1 (H*2O=1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE, BLACK POWDER, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CO, CO*2 AND NO*X.

Disposal

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER CONDITIONS WHICH MEET ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.